Incubator weekly maintenance content

1. Check the water level of the humidification drip tray.
2. Check the sealing condition of the door.
3. Check the ventilation and exhaust conditions.
4. Clean the fluff and other debris on the rotating screw of the air door to prevent it from getting stuck.
5. Wipe the outside of the chassis and control cabinet with a semi-dry rag; clean the humidification basin for each batch of the hatcher. And clean the fluff on the top of the machine.

The monthly maintenance content of the incubator

1. Check whether the fan, humidification, and egg turning chain are in good condition.
2. Check the heating function.
3. Check the ultra-high temperature alarm function.
4. Check whether the egg turning function is normal.
5. Thoroughly clean and disinfect the equipment.
6. After each batch of incubation, the machine, humidification basin and humidification evaporation pan must be cleaned.

The incubator maintains content every three months

1. Clean the probe.
2. Calibrate temperature and humidity.
3. Grease the fan bearing once.
4. Clean the egg-turning worm wheel with oil and lubricate it with butter.
5. Grease the screw and sliding parts of the damper mechanism.
6. The oil must be changed once for humidification and egg-turning reducers.
7. Comprehensively check the control functions of each system.

Maintenance of the incubator when the machine is not used for a long time

Before the machine is left unused for a long time, the drying machine must be turned on to heat up, and the water in the humidification basin must be drained and dried. After each operating part is cleaned, it is protected with butter to prevent Rusty. This is very important.

You decide not to use a certain machine, but do not maintain it according to the above-mentioned methods, then when you want to use it next time, it may malfunction and fail to work.