The heating effect of brooding warmer

In winter, a product can make the temperature of a room of 10-15 square meters reach 35 degrees or more, and in other seasons, it can make a space of 20-25 square meters reach 35 degrees or more.
The brooding warmer is used in conjunction with coal stoves or hot blast stoves, which can effectively solve the problems of poor temperature control and uneven heating of coal stoves. The brooding warmer can not only supplement the space temperature, but also the unique four-fan design can also save space The temperature at each point is uniform, and the temperature control effect is excellent, saving worry and effort.

Installation and operation

If it is flat rearing (ground breeding), hang the brooding warmer in the middle of the field, the height is between 1.8-2.0 meters, and the height can also be adjusted according to the actual situation. After hanging up, connect the two 220V power cords to the terminals marked with L and N on the brood warmer, pay attention to tighten the screws, and then hang the temperature probe in the middle of the warmer and the ground. You can also adjust the height according to your needs.

If it is three-dimensional breeding (multi-layer cage breeding), install the warmer above the cage in the middle of the field to avoid the cage. As long as it is installed in the center and above the cage. The number of heat preservation devices installed depends on the size of the site and the required temperature. After the installation is complete, turn on the air switch and the brood warmer starts to work. At this time, you can press the up and down buttons to set the desired temperature. The temperature can be adjusted from 1-99 degree heating tube power when it reaches 38 degrees and no longer heat it. When the temperature drops to 35 degrees, it will automatically turn on heating. (The heat preservation of the site is good, the longer the heating tube is turned off, the more energy-saving the product will be)