The mink cage is made of welded wire mesh, and the manufacturing technology is simple and convenient. Mink cage welded wire mesh specifications and applications

Welded wire mesh for mink cages increases the bedding and does an excellent job of cleaning the cage. The small room is wet and not cleaned with too much feces on the cage net, and competition for food during feeding. It is easy to cause the plush to be polluted and tangled, so it should be kept in a monotonous room without pollutants. , There is no fecal accumulation on the cage net. When feeding, be careful not to contaminate the plush with the food, and increase the bedding at the same time.

The fur mink are kept on the shady side of the mink shed to prevent direct sunlight from browning the down. Increase the bedding and do an excellent job of cleaning the cage. The small room is wet and not cleaned, too much feces on the cage net, and competition for food during feeding can easily cause the plush to be polluted and tangled—fecal accumulation. When feeding, be careful not to contaminate the plush with the food, and increase the bedding at the same time. The bedding not only has the function of heat preservation but also has the function of packing up the plush.

The material is made of galvanized wire and stainless steel wire, welded into wire mesh and processed into the cage. At that time, hot-dip galvanized welded wire mesh was widely used in the market. Mink cage, stainless steel material can be used for 12 years, and hot-dip galvanized material can be used for 7 years.

characteristic

Vertical rearing is easy to manage, saves space, effectively prevents epidemics, and increases the survival rate of ferrets.

Extensibility

It can be adjusted appropriately according to the size of the place, and an automatic drinking water system can be installed. Inch positive hole, 2.5mm, the bottom mesh standard is 1*1.5 inch hole, 2.5mm, made of low-carbon steel wire, (hot-dip galvanized), zinc-aluminum alloy wire welded and then hot-dip galvanized welded mesh.

The standard is 50cm, 70cm, and 90cm for the large cage, the overall standard is 2.2m, with 6 seats, and each standard is 31cm*46cm*90cm. The standard wooden box is 206cm, the thickness of 1.5cm is glued to wood, and each side is reserved at 3cm Easy to hang. The diameter of the door opening is 10cm, and it is wrapped by a 0.4mm steel plate to prevent the fur from being scratched; the door opening can also be equipped with a windshield; the cage is well-equipped and the technology is sophisticated. After multiple processes of processing and combination, a complete set of mink cages can be completed. , Manufacturers have the confidence to do very well for customers and look forward to business friends from all over the world coming to consult.

Placement method

The cage should be 40cm or more above the ground to ensure ventilation. Poultry or other land animals can also be raised in a mink companion. www.are4.net

Mink cages are available on the top and the side. , 6 litters. 8 litters. . Also sells a variety of cage accessories and cage door frames. Hook, spring Wooden box iron ring

Cage Standard

Length, width, and height standard (cm):

196*50*46; 196*70*46; 196*90*46. The large cage consists of 5 or 6 bits, with a total length of 1.96m.

top of the net

The top mesh is: 1-inch positive hole, wire diameter of 220 wires (2.2mm)

Bottom of the net

1*1.5 inch mesh, 250 wire (2.5mm) and above

feeding net

1-inch positive hole, wire warp 250 (2.5mm)

middle distance

1/2*1 inch mesh, 180 threads (1.8mm), the distance is composed of two layers of mesh, and there is a space in the middle to prevent adult minks from fighting and getting injured.