Blade gill nets:

 

With the improvement of people’s living standards, the safety awareness has also been generally improved, and the blade gill nets that came into being have been widely used in military areas, prisons, schools, government agencies, and living quarters, private houses, villas, and doors and windows. , highways, railway guardrails, and border lines can all be used for protective isolation. It is formed by stamping and forming a steel plate (blade plate) and attached to the hot-dip galvanized steel wire (core wire).

Razor wire mesh can be divided into: galvanized and stainless steel according to different materials.

According to different shapes, razor barbed wire can be divided into accordion-shaped barbed wire, tiled barbed wire and welded barbed wire.

There are two types of razor wire mesh: BTO and CBT. BTO includes BTO-10 BTO-18 BTO-22 BTO-28 BTO-30, CBT includes CBT-60 CBT-65. BTO-22 is a commonly used model in China (other models can be customized).

Blade gill nets can be used in military areas, prisons, government offices, banks, and residential walls, private houses, villa walls, doors and windows, highways, railway guardrails and border lines to protect security.

The installation method of the accordion-shaped blade gill net,
1. According to the estimated distance and the requirements of the drawings, determine the spacing of the brackets
2. After measuring the distance, punch holes in the wall according to the chassis of the bracket, and fix the bracket with expansion bolts:
3. First hang a support wire on a bracket to be installed on the anti-climbing net, use the support wire to connect the anti-climbing blade thorns together, and then fix the support wire on the installed bracket. According to the requirements, adjust the interval between the anti-climbing knife barbed wire to make it even and beautiful.
4. Pull the barbed wire connected in series with the support line and fix it on the support line. The connection between one roll and the next roll of anti-climbing accordion net is usually fixed with a fixing card.
This is relatively strong (note: if it is only fixed with tying wire, it is not firm and easy to loosen, for your reference)
5. According to step 4, proceed in sequence until the last bracket is installed, fix the support wire on the bracket, fix the anti-climbing barbed net with the buckle, and the installation is complete.
6. Clean up the installation site.
Of course, the above steps are only general installation steps. If there is a special design, it needs to be constructed and installed according to the drawings and the requirements of Party A.